Xerox Nuvera 288 User Manual And Training Aid Download

Page: 56 / 256

file:///C|/Documents%20and%20Settings/Miz%20B/My%2...TA/Nuvera%209.0%20UGTA_FINAL/English/hdi_f_020.htm (1 of 2)8/13/2008 2:14:03 PM

Using the Multifunction Finisher (MFF) Pro Plus

Using the MFF Pro Plus allows you to finish your jobs using the same features available on the MFF Professional but also includes an

insertion module that offers these additional finishing features:

To Insert Preprinted Sheets on the MFF Pro Plus

To insert covers, preprinted tabs or colored paper into your job, follow these steps:

To Hole Punch Jobs on the MFF Pro Plus

If the 2/3 Hole Paper Punch is installed on the Pro Plus, you can indicate that you want to finish and punch your printed documents with

2 or 3 holes at the lead edge. If the 2/4 Hole Paper Punch is installed, you can identify your documents to be finished and punched with

2 or 4 holes. The various punch finishing options, such as hole punching Portrait Top or Landscape Right, are selectable from the

Output tab, the Stapling/Finishing area on the FreeFlow Print Server interface. Use this hole punching feature if you want to easily

place your finished document in a 2, 3 or 4 ring binder.

Do not use this feature on labels, transparencies, envelopes, or synthetic paper.

●

An Insertion Tray for inserting preprinted tabs, covers and colored sheets into your job

●

A 2/3 or 2/4 Hole Punch capability

1. On the Home Screen, select

Paper Trays

2. Select the paper tray (for example, Tray 5 Insertion Tray or Finisher A, Tray 1) and right-click on the tray.
3. Select [

Properties

]. To use a particular stock type for the tray or change other properties, select those attributes to match

what will be loaded in the Insertion Tray.

4. Click <

5. At the MFF Insertion Tray, adjust the guides for the paper size and load paper in the Insertion Tray with text face up and

according to the label. Load tabbed stock with tabs leading.

6. On the Home Screen, open your job.
7. Select

[Special Pages]

8. Select

[Inserts]

and define the insertion page range for the job.

9. Print the job.

1. Select

Job Manager

Copy

and open the job.

2. Select the Output tab and the Stapling/ Finishing FAB.
3. From the Stapling/Finishing pull-down menu, select the type of hole punch finishing, staple finishing, or both (multiple

finishing) to apply.

4. Click <

5. Print the job. Hole punch finishing output is sent to the Top Tray or the Main Tray.

2-punch

171-321mm (6.74-12.63 in) width

148-457mm (5.83-17.99 in) length

56-200 gsm

3-punch

232-321mm (9.14-12.63 in) width

148-457mm (5.83-17.99 in) length

56-200 gsm

4-punch

255-321mm (10.04-12.63 in) width

148-457mm (5.83-17.99 in) length

56-200 gsm

Paper Specifications for the Hole Punch Module

Type

Size

Weight

56 of 256

Summary of Contents for Nuvera 288

































































































































































































































































Search results

Summary of Contents for Nuvera 288

Reviews:

Related manuals for Nuvera 288

Brands by name

Popular brands

Xerox Nuvera 288, User Manual And Training Aid

Search results

Summary of Contents for Nuvera 288

Reviews:

Related manuals for Nuvera 288

Brands by name

Popular brands