file:///C|/Documents%20and%20Settings/Miz%20B/My%2...TA/Nuvera%209.0%20UGTA_FINAL/English/staple_00.htm (1 of 2)8/13/2008 5:25:51 PM
Clearing Stapler Jams
In the event of a stapler jam, the system staplers have been
designed to allow the user to easily correct the jam and continue
with the job. Take the time to familiarize yourself with the
following procedures on clearing staple jams. In addition, view
the videos depicting clearing jams.
Stapler jam notification
When any of the staplers become jammed, the Xerox Nuvera
will provide notification by:
To clear stapler jams
Double-click the system alert to see details on the action
needed, as well as the location of the staple mechanism.
Access the Main Stapler Mechanism in the MFF
Access the Main Stapler Mechanism in the BFM or
BFM Plus
●
alpha-numeric messages
●
a machine "mimic", or pictorial representation of the
machine on the UI screen, depicting the location of the
jam
●
a steady or blinking Attention Light.
1. Once you have identified the location of the stapler,
open the access panel and locate the stapler housing.
It is identified with a pictorial representation of a staple.
2. Grasp the stapler housing drawer handle and pull out
towards you.
3. There are pictorial instructions affixed to the machine
chassis near the stapler access. Follow these pictorial
instructions in order to remove and replace the Main
Stapler Cartridge.
1. Once you have identified the location of the stapler,
select [
Printer: Unlock Finisher
] in the User Interface.
The
Unlock Base Finisher
window appears.
2. In the
Stapler Drawer
field, click <
Unlock
>.
3. Pull out the Stapler Drawer.
4. There are pictorial instructions affixed to the machine
chassis near the stapler access. Follow these pictorial
instructions in order to remove and replace the staple
cartridges.
Video
Home
|
Resources
|
Search
|
Index
|
How Do I?
|
System Tour
|
|
Maintenance
If stapling is not possible due to out of staples and this
condition is detected
while the job is running
, the
system shall hold the job and wait until the staples can
be replaced or the job to be cancelled before continuing
to run other jobs.
Problem Solving
NOTE
: If stapling is not possible due to out of staples
and this condition is detected
prior to running the job
,
the system shall hold the job until the staples can be
replaced, but will allow other jobs to proceed.
About this Site
NOTE
: Staple error messages will
automatically unlock the finisher.
Clearing staple jams from the MFF
stapler
Clearing staple jams from the BFM
staplers
242 of 256
