background image

file:///C|/Documents%20and%20Settings/Miz%20B/My%20Documents/A_Xerox...P/Nuvera%209.0%20UGTA/Nuvera%209.0%20UGTA_FINAL/English/comp_010.htm (1 of 2)8/13/2008 1:38:22 PM

About Impositions

Imposition is the process of positioning multiple page images on 

a single output sheet to be printed at one time. Imposition has 

no effect on the content of any individual page image; it only 

affects the size of the page image and where the pages are 

placed on an output sheet.

Imposition options include the ability to create 2-up to multiple-

ups documents including custom multiple-up For a custom 

multiple-up, the Xerox Nuvera automatically calculates how 

many images will fit on the sheet size selected for the job. 

Imposition settings are provided for setting gutter margins and 

Repeated, Sequential, and Alternating image on sheet outputs. 

Signature

 is the name given to a single sheet of paper or 

other substrate after it has been folded. Many books are made 

up of signatures. The manner in which signatures are bound 

influences the way that they must be printed.

For more information about setting up impositions, see 

Setting 

imposition options

.

Impositions and Saddle Stitched Books

Saddle stitched books and calendars consist of all the 

signatures nested in one group with staples inserted at the fold. 

When signatures are nested, the fold, or gutter, gets wider the 

further a sheet is from the centerfold (see Figure 1, at the left 

side). 

Figures

Figure 1

Figure 1: (left) Nested signatures forming a saddle stitched book. (right) Stacked 

signatures forming a perfect-bound book.

Figure 2

Figure 2: Page order for a simple 4-page book. Input pages are on the left. Output 

signature sheet is on the right. Numbers in parentheses represent page numbers on 

back side of the signature sheet.

Figure y

Therefore, page frames must be shifted slightly to compensate 

for the thickness of the gutter. The page frames are moved 

slightly away from the fold and toward the outside edge. This 

results in the outside margin becoming narrower. When 

finished, the sheets closer to the centerfold (with the narrower 

fold) will have more trimmed from the outside margin. When 

done properly, the images will appear in the same position on 

each page as the pages are flipped.

Home

|

Resources

|

Search

|

Index

|

 

How Do I?

|

System Tour

|

|

Maintenance

Problem Solving

 

NOTE

: Page frame shifting is done automatically.

About this Site

121 of 256

Summary of Contents for Nuvera 288

































































































































































































































































Reviews: