Xerox M20I - WorkCentre B/W Laser, System Administration Manual

Page: 62 / 218

Page 4-8 Xerox WorkCentre M20i System Administration Guide
Print Driver Ins
tallati
on for
Networ
ked Prin
te
rs
Windows NT V4.0 (TCP/IP)
NOTE: TCP/IP Print Services must be installed and running on the workstation.
Use the Add Printer Wizard to add the WorkCentre M20i to the network.
¾
At the Windows NT workstation, select [Start] , select [Settings] , and then select [Control
Panel] .
Double-click on the [Network] icon and then select [Services] .
Ensure that Microsoft TCP/IP Print Service is running and select [Start] , select [Settings] ,
and then select [Printers] .
Double-click on the [Add Printer] icon to display the Add Printer Wizard.
¾
Select [My Computer] and then select [Next] to display the dialog box listing available
ports.
Select [Add Port] to display the Printer Ports dialog box.
Select [LPR Port] and select [New Port] to display the Add LPR compatible printer dialog
box.
¾
Enter the IP Address of the printer in the [Name or address of server providing lpd]
field.
Enter [lp] (in lower case) in the [Name of printer or print queue on that server] field.
NOTE: lp must be entered regardless of the name of the printer or print queue. lp is
the name of the remote printer/server on the WorkCentre M20i . This name does not
change.
Select [OK] .
Select [Close] .
¾
With the New Port selected, select [Next] .
Insert the CD ROM with the WorkCentre M20i drivers into the workstation and select
[Have Disk] .
Browse to the required Windows NT driver on the CD ROM and select [OK] .
1
2
3
4