Xerox M20I - WorkCentre B/W Laser, System Administration Manual

Page: 192 / 218

Page 11-24 Xerox WorkCentre M20i System Administration Guide
Adm
inistr
a
tion
T
ools
Checking Configurations
Use these instructions to check the configuration settings of the WorkCentre M20i .
To check the configuration, perform these steps:
¾
Enable CentreWare Internet Services (see “Enabling Internet Services” on page 11-20 ).
¾
At the CentreWare Internet Services Home Page for the WorkCentre M20i , select the
[Properties] tab.
¾
Select the plus symbol [+] to the left of the General Setup folder in the Properties frame.
¾
In the Properties frame, within the General Setup folder, select [Configuration] .
The lower pane will show the firmware versions.
Click [Print System Data List] to print this report.
¾
In the upper pane, click the link for the settings that you want to check.
1
2
3
4
5