Xerox M20I - WorkCentre B/W Laser, System Administration Manual

Page: 86 / 218

Page 6-8 Xerox WorkCentre M20i System Administration Guide
Advanced TCP
/IP
Set
up
Enabling/Disabling HTTP
This procedure is used to enable or disable Hypertext Transfer Protocol (HTTP) on the
WorkCentre M20i.
To enable HTTP, at the WorkCentre M20i , perform these steps:
¾
Ensure that the basic TCP/IP settings have been made (see “Basic TCP/IP Settings” on
page 2-5 ).
¾
Press the [Machine Status] button.
1
2
3
¾
Press or until System
Admin Tools is displayed and
press [Enter].
¾
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
4
¾
Press or until Network
Setup is displayed and press
[Enter].
System Admin Tools
[Network Setup]
5
¾
Press or until Configure
Network is displayed and press
[Enter].
Network Setup
[Config. Network]