Xerox Legacy 4590 User Manual Download Page 81

Page: 81 / 188

Xerox 4590 EPS/4110 EPS User Guide

5-9

5. Maintenance

Push the removed cartridge back into the original position
until a click sound is heard.

Close the right cover on the finisher.

NOTE: A message will be displayed and the machine will not
operate if the right cover is even slightly open.

Replacing the staple cartridge for booklets

When a booklet finisher (optional) is installed and it is time to

replace the staple cartridge for booklets, a message appears on

the Control Panel screen.

CAUTION:

Using staple cartridges not recommended by Xerox

may impair quality and performance. Use only staple cartridges

recommended by Xerox for the machine.

NOTE: To order a staple cartridge, contact the Customer Support
Center.

Make sure that the machine has stopped and then open the
right cover on the finisher.

Summary of Contents for Legacy 4590





























































































































































































Search results

Summary of Contents for Legacy 4590

Reviews:

Related manuals for Legacy 4590

Brands by name

Popular brands

Xerox Legacy 4590, User Manual

Search results

Summary of Contents for Legacy 4590

Reviews:

Related manuals for Legacy 4590

Brands by name

Popular brands