Xerox Legacy 4590 User Manual Download Page 125

Page: 125 / 188

Xerox 4590 EPS/4110 EPS User Guide

6-39

6. Problem Solving

Close the finisher left cover.

NOTE: A message will be displayed and the machine will not
operate if the Staple Finisher's left cover is even slightly open.

Paper jams at lever 1d

Make sure that the machine has stopped and then open the
left cover on the finisher.

Move lever 1d upwards and remove the jammed paper.

NOTE: If paper is torn, check for any torn pieces of paper inside

the machine.

Return lever 1d to the original position.

Close the Finisher left cover.

NOTE: A message will be displayed and the machine will not

operate if the Staple Finisher's left cover is even slightly
open.

Summary of Contents for Legacy 4590





























































































































































































Search results

Summary of Contents for Legacy 4590

Reviews:

Related manuals for Legacy 4590

Brands by name

Popular brands

Xerox Legacy 4590, User Manual

Search results

Summary of Contents for Legacy 4590

Reviews:

Related manuals for Legacy 4590

Brands by name

Popular brands