Xerox Legacy 4590, User Manual

Page: 18 / 188

Xerox 4590 EPS/4110 EPS User Guide 1-12
1. Product overview
Power on/off
WARNING:
Never touch a labeled area indicating High
Temperature. Contact can lead to burns.
Switch on the power before operating the machine. After the
power is on, the machine will take about 5 minutes to warm up
before you can start printing. Turn the machine off at the end of
the day or when it is not in use for a long period of time. Also, the
Power Saver feature on the machine will automatically activate
when print data has not been received for a specified time thereby
reducing power consumption.
NOTE: For information about the power saving feature, refer to
“Power Saver Mode” in this chapter.
NOTE: For information about when and how to power down and
restart the entire printing system (both the DocuSP Controller and
the machine), refer to the System Administration Guide.
Power on
1.
Open the power switch cover and press the power switch to
the (
|
) position to turn the power on.
NOTE: The “Please wait...” message indicates that the machine
is warming up. The machine cannot be used while it is warming
up.