Xerox Legacy 4590, User Manual

Page: 111 / 188

Xerox 4590 EPS/4110 EPS User Guide
6-25
6. Problem Solving
Paper jams
When paper jams inside the machine, the machine stops and an
alarm sounds. A message also displays on the Control Panel
screen. Follow the instructions displayed and remove the jammed
paper.
NOTE: Paper jams can be remedied with the machine still
powered on. If the power is turned off, all information stored to the
machine's memory will be erased.
Gently remove the paper taking care not to tear it. If paper is torn
while it is being removed from the machine, remove all torn pieces
making sure that none remain inside the machine.
CAUTION:
Do not touch components inside the machine. This
can cause print defects.
If a paper jam message is displayed again after you have
remedied the paper jam, paper is probably jammed at another
location. Remedy this by following the message on the screen.
KEY POINT:
If a piece of jammed paper remains inside the
machine, the paper jam message will not disappear from the
display.
When you have finished remedying a paper jam and the jam
occurred during printing, select either
Cancel
or
Start
from the
touch screen or press the
Start
button on the Control Panel.
Printing is resumed from the state before the paper jam occurred.
WARNING:
When removing jammed paper, make sure that no
bits and pieces of jammed paper are left in the machine. A piece
of paper remaining in the machine can cause fire. If a piece of
paper is stuck in a hidden area or paper is wrapped around the
fuser unit or rollers, do not remove it forcefully. You can get injured
or burnt. Switch off the machine immediately and contact the
Customer Support Center.