![background image](http://html1.mh-extra.com/html/xerox/legacy-4590/legacy-4590_user-manual_3869527105.webp)
Xerox 4590 EPS/4110 EPS User Guide
6-19
6. Problem Solving
016-777
O
Cause
A hard disk error occurred during image processing.
Remedy
The hard disk might be defective. When replacing a hard
disk, contact the Customer Support Center.
016-792
O
Cause
Specified job history could not be acquired when printing
Job Counter Report.
Remedy
Specified job history does not exist.
016-793
O
Cause
The hard disk has run out of free space.
Remedy
Either remove unnecessary data from the hard disk to
increase free disk space or initialize the hard disk.
016-799
P
Cause
An illegal print parameter is included.
Remedy
Confirm the print data and option and specify the print
data again.
024--746
P
Cause
A feature (one of paper size, tray, output tray, or 2 sided
printing) that is incompatible with the specified paper
quality has been specified.
Remedy
Check the print data.
024-747
P
Cause
An illegal print parameter combination was set. For
example, a non-standard size was specified and
Tray Selection was set to Auto.
Remedy
Check the print data. In the above case, select Tray 5
(Bypass).
024-931
O
Cause
The Staple Waste Container is full or near full.
Remedy
Remove the Staple Waste Container and reinstall a new
one.
024-932
O
Cause
The Staple Waste Container is not attached.
Remedy
Check that the Staple Waste Container is installed in the
finisher and inserted correctly.
024-956
O
Cause
Tray 7 (inserter) is empty/out of paper.
Remedy
Add paper to Tray 7.
024-957
O
Cause
Inserter trays are empty/out of paper.
Remedy
Add paper to the paper trays of the inserter.
024-974
O
Cause
Designated paper size and the size of paper in the tray
differs when feeding paper from the inserter.
Remedy
Reset the paper or cancel the job.
024-976
O
Cause
Finisher staple status is NG.
Remedy
Check staples and reset correctly.
024-977
O
Cause
Finisher staple feeding is not ready.
Remedy
Check staples and reset correctly.
024-978
O
Cause
Booklet Finisher staple operation is not ready.
Remedy
Check staples and reset correctly.
024-979
O
Cause
The staple cartridge is empty.
Remedy
Check staples. Follow procedures to remove and
replace staple cartridge.
024-980
O
Cause
The finisher stacker tray is full.
Remedy
Remove all paper from the stacker tray.
Error Code
Category
Cause and Remedy
Print/Other
Summary of Contents for Legacy 4590
