manualshive.com logo in svg

Xerox FS-C8008DN, Operation Manual

The Xerox FS-C8008DN Operation Manual is available for free download on our website. This comprehensive manual provides detailed instructions and tips for optimal use of the product. Discover all the features and functionalities of the Xerox FS-C8008DN by downloading the manual from manualshive.com today.

Share
Download
background image

5.1 Toner Container Replacement

5-2

5.1

Toner Container Replacement

5.1.1

Frequency of toner container replacement

The life of the toner containers depends on the amount of toner required to accomplish your 
printing jobs. When 5 % coverage (a typical business document) of individual toner colors 
is assumed for A4 or letter size paper in landscape orientation:

•

The black toner container lasts an average of 25,000 monochrome pages.

•

The cyan, magenta, and yellow toner containers last an average of 10,000 color images.

You can print a status page to check how much toner remains in the toner container. For 
details, see 

Chapter 3 Using the Operator Panel, section 3.3.2 Printing a Status Page on 

page 3-17

. The Toner Gauge section on the status page shows a progress bar for each color, 

which roughly represents how much toner is left in the toner container.

Starter Toner Containers

The toner containers packed with the new printer are starter toner containers. The black 
starter toner container lasts an average of 12,500 monochrome pages. The cyan, magenta, 
and yellow starter toner containers last an average of 5,000 color images for each.

Toner Kits

It is strongly recommended to use the new Kyocera Mita TK-800 Toner Kit supplied from 
Kyocera Mita to prevent printer troubles and ensure a long printer life.

The TK-800 Toner Kits are supplied in each of the following four colors. The letter 
following TK-800 describes the color of toner included in the container as follows:

 A new TK-800 toner kit for each color contains the following items:

•

Toner Container

•

Cleaning cloth

•

Grid cleaner for main charger cleaning

•

Plastic waste bags for old toner container and old waste toner box

•

Waste toner box

•

Installation Guide

Note

Do not remove the toner container from the carton until you are ready to install it in 
the printer.

TK-800C

Cyan

TK-800M

Magenta

TK-800Y

Yellow

TK-800K

Black

Summary of Contents for FS-C8008DN























































































































































































































Reviews:

No comments

Related manuals for FS-C8008DN

Panasonic Panafax UF-9000 Service Manual preview
Panafax UF-9000
Brand: Panasonic Pages: 375
Citizen CMP-10 Command Reference Manual preview
CMP-10
Brand: Citizen Pages: 80
Xerox 5550B - Phaser B/W Laser Printer Administrator'S Manual preview
5550B - Phaser B/W Laser Printer
Brand: Xerox Pages: 117
Xerox WorkCentre 3345 Quick Use Manual preview
WorkCentre 3345
Brand: Xerox Pages: 18
Olivetti FS-519 Service Manual preview
FS-519
Brand: Olivetti Pages: 111
Xerox DocuPrint 4050 NPS Message Manual preview
DocuPrint 4050 NPS
Brand: Xerox Pages: 248
AstroJet M1DX Operator'S Manual preview
M1DX
Brand: AstroJet Pages: 97
A&D AD-8120 Instruction Manual preview
AD-8120
Brand: A&D Pages: 32
Keithley Model 750 Instruction Manual preview
Model 750
Brand: Keithley Pages: 97
BIXOLON SPP-R220 Installation Manual preview
SPP-R220
Brand: BIXOLON Pages: 20
TEC B-570 SERIES Maintenance Manual preview
B-570 SERIES
Brand: TEC Pages: 92
Sartorius YDP30 Operating Instructions Manual preview
YDP30
Brand: Sartorius Pages: 202
Oki MC770x User Manual preview
MC770x
Brand: Oki Pages: 78
Canon imagePRESS C1 Service Manual preview
imagePRESS C1
Brand: Canon Pages: 1265
Canon Finisher-T1 Service Manual preview
Finisher-T1
Brand: Canon Pages: 174
Canon FINISJER-E1 Service Manual preview
FINISJER-E1
Brand: Canon Pages: 168
Brother 9500 - HL 1660EN B/W Laser Printer User Manual preview
9500 - HL 1660EN B/W Laser Printer
Brand: Brother Pages: 258
Oce cm3521 User Manual preview
cm3521
Brand: Oce Pages: 198

Brands by name

Popular brands

Load more brands