3.13 Other Modes
3-97
3.13.9
Setting the Auto Continue Recovery Time
Follow the procedure given below to change the recovery time for Auto Continue.
1
11
1
Press the
MENU
key.
2
22
2
Press the
U
or
V
key repeatedly until
Others >
appears.
3
33
3
Press the
Z
key.
4
44
4
Press the
U
or
V
key repeatedly until
Auto Continue Mode >
appears.
5
55
5
Press the
Z
key and display
>> Auto Continue Timer
. The default setting is
30
seconds.
6
66
6
Press the
ENTER
key. A blinking cursor (
_
) appears.
7
77
7
Press the
U
or
V
key to increase or decrease the value at the blinking cursor and set
the desired time. The time must be set between
000
and
495
seconds, in 5-second
increments. If set to
000
, printing will be continued immediately without any time
interval. You can use the
Z
and
Y
keys to move the cursor right and left.
8
88
8
Display the desired time and press the
ENTER
key.
9
99
9
Press the
MENU
key. The display returns to
Ready
.
Others >
>Auto Continue >
Mode On
>>Auto Continue
Timer 030sec.
>>Auto Continue
Timer 030sec.
