Xerox FS-C8008DN Operation Manual Download

Page: 73 / 214

3.4 e-MPS

3-28

3.4.4

Retrieving Jobs from Virtual Mailbox (VMB)

To retrieve the jobs posted in the virtual mailbox, proceed as follows.

Press the

MENU

key.

Press the

key repeatedly until

e-MPS >

appears.

Press the

key.

Press the

key repeatedly until

>Print

VMB

Data

appears. The virtual

mailbox number will also appear.

If you have named the virtual mailbox with an alias on the printer driver, the alias
(

Richard

, in this example) will follow the number:

Press the

ENTER

key. A blinking question mark (

) appears.

Press the

ENTER

key. The document in the mailbox is printed and automatically

deleted from the mailbox.

Printing a List of VMB

A Virtual Mailbox list includes the jobs currently stored in the mailboxes.

Press the

MENU

key.

Press the

key repeatedly until

e-MPS >

appears.

Press the

key.

e-MPS >

>Print VMB Data

Tray001:

>Print VMB Data

Tray001:Richard

>Print VMB Data

Tray001?Richard

e-MPS >

Summary of Contents for FS-C8008DN






















































































































































































































Search results

Summary of Contents for FS-C8008DN

Reviews:

Related manuals for FS-C8008DN

Brands by name

Popular brands

Xerox FS-C8008DN, Operation Manual

Search results

Summary of Contents for FS-C8008DN

Reviews:

Related manuals for FS-C8008DN

Brands by name

Popular brands