Xerox EC70, User Manual

Page: 54 / 182

Specifying the Original Size
To specify the original size so that the correct area is copied:
1. On the control panel touch screen, touch Copy , then touch the Layout Adjustment tab.
2. Touch Original Size .
3. To pre-scan the first page of the originals to determine the area to copy, touch Auto Detect .
• If the area to be copied matches a particular paper size, touch Manual Size Input and then
touch the required paper size.
• To view the entire list, touch the scroll arrows.
4. If the original contains pages of different sizes, touch Mixed Size Originals .
5. Touch Save .
Erasing the Edges of a Copy
By specifying the amount to erase on the right, left, top, and bottom edge, you can erase content
from the edges of your copies.
To erase edges on copies:
1. On the control panel touch screen, touch Copy , then touch the Layout Adjustment tab.
2. Touch Edge Erase .
3. To erase all the edges by the same amount, touch All Edges , then touch the plus ( + ) or minus ( - )
icons.
4. To specify different amounts for the edges, touch Individual Edges .
For each edge, touch the plus ( + ) or minus ( - ) icons.
5. If you select 2-sided copies, to specify the amount to erase from each edge on Side 2, touch the
plus ( + ) or minus ( - ) icons, or touch Mirror Side 1 .
6. To cancel edge erase, touch Print to Edge .
7. To specify orientation of the original document as you place it in the document feeder or on the
document glass:
a. Touch Original Orientation .
b. Touch either Upright Image or Sideways Image (top to left).
c. Touch Save .
8. Touch Save .
Note: If preset values such as
Hole Punch Erase
or
Header/Footer Erase
were previously
saved, you can touch the preset in the lower-left corner of the window.
54 Xerox ® EC70 Color Copier/Printer
User Guide
Services and Functions