Xerox EC70, User Manual

Page: 47 / 182

1. At the control panel, touch Copy .
2. Touch the required output color:
•
Auto Detect
: This option detects the color content in the original document. If the original
document is a color document, the output is in full color. If the original document is a black
and white document, the output is in black only.
•
Color
: This option uses all four printing colors: cyan, magenta, yellow, and black, to produce
full-color copies.
•
Black and White
: This option copies in black and white only. Colors in the original document
are converted to shades of gray.
• Dual Color : This option allows you to separate the colors of the original document into two
groups of colors for copying. The Source Color is extracted from the original document, then
replaced by the Target Area Color. This option replaces the rest of the colors with the Non-
Target Area Color that you select.
•
Single Color
: This option allows you to copy in one of six preset or custom colors.
•
More
: This option allows you to change preset or custom colors.
Reducing or Enlarging the Image
To reduce or enlarge the image:
1. At the control panel, touch Copy .
2. To reduce or enlarge the image proportionally, do one of the following:
• Touch the plus ( + ) and minus ( - ) icons.
• Touch More , then touch the plus ( + ) and minus ( - ) icons.
3. To reduce or enlarge the image proportionally by a preset amount, such as to fit a particular
paper size:
a. Touch More .
b. Touch Proportional % , then touch one of the Preset % buttons.
c. To center the image on the page, touch Auto Center . Touch Save .
d. To perform a minor adjustment, select Slight Reduction Improved Fit .
4. To reduce or enlarge the width and length of the image by different percentages:
a. Touch More , then touch Independent X-Y% .
b. To scale the width or X axis of the image, for Width percentage touch the plus ( + ) and minus
( - ) icons.
c. To scale the length or Y axis of the image, for Length percentage touch the plus ( + ) and
minus ( - ) icons.
d. To center the image on the page, touch Auto Center .
5. Touch Save .
Selecting the Tray to Use for Copies
The printer automatically selects the paper tray to use for copying based on system administrator
settings. To use a different paper type for copying on letterhead, colored paper, or different paper
sizes, select the paper tray that is loaded with the required paper.
To select the tray to use:
1. At the control panel, touch Copy .
2. For Paper Supply , touch the required tray.
Xerox ® EC70 Color Copier/Printer
User Guide
47
Services and Functions