Xerox DocuPrint 96, Message Manual

Page: 135 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-57
OS2400 Printer misfeed detected. Check paper supply.
Paper was improperly fed from the main and/or auxiliary feeder tray,
causing a jam condition.
Action Release the feeder belt and check both feeder trays, removing any
misfed paper. (Refer to the problem solving chapter in your
DocuPrint 96/DocuPrint 96MX LPS Operator Guide
.
OS2451 Requested bypass not on system. “CONT” defaults to bin. Enter
Continue or Abort.
A job with DESTINATION=EXPORT is being run on a printer with no
Bypass Transport. Press CONTINUE to resume input processing, or
abort the job if desired.
Action None.
OS2452 Problem with segment separator save file.
A problem has been encountered while accessing the separator
page save file.
Action None.
OS2453 Invalid font index number for printable string.
The font index specified for the SNUMBER string on a separator
page is invalid. Correct and rerun job.
Action None.
OS2501 Black dry ink bottle is empty.
The black primary dry ink bottle is empty.
Action Replace bottle and resume printing.
OS2502 Color dry ink bottle is empty.
The primary color dry ink bottle is empty.
Action Replace bottle and resume printing.
OS2510 Color housing: not ready
The color housing is not ready for the highlight color print job. This
message is followed by the messages OS2680 PRINT QUALITY
ADJUSTMENT IS REQUIRED FOR COLOR PRINTING and
OS2670 ENTER PQA OR SUB INK COMMAND OR ABORT THE
PRINT JOB.
Action Perform a print quality adjustment (PQA) before using the color
housing for color printing
or
Abort the job.