Xerox DocuPrint 96, Message Manual

Page: 25 / 358

HIP (HOST INTERFACE PROCESSOR) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 4-3
HP0210 Transmission aborted: JOB ID xxxx
The HIP ABORT command was entered. The job being sent has
been cancelled.
Action None.
HP1010 Input starting report - jid xx
This is displayed while in a concatenated job mode if the
concatenated job operator display mode is ON when input starts a
HIP job.
Action None.
HP1020 Input report complete - jid xx
This is displayed while in a concatenated job mode if the
concatenated job operator display mode is ON when input finishes a
HIP job.
Action None.
HP1030 Output starting report - jid xx
This is displayed while in concatenated job mode if the concatenated
job operator display mode is ON when output starts a HIP job.
Action None.
HP1040 Output report complete - jid xx
This is displayed while in a concatenated job mode if the
concatenated job operator display mode is ON when output finishes
a HIP job.
Action None.
HP1100 No jobs to abort
The HIP ABORT command was entered, but the host has not sent
any jobs to the printer.
Action None.
HP1110 End of job display
All job information appears on the system (controller) display. No
more related information will appear at this time.
Action None.
HP1120 HIP job queue cleared
No data remains in the HIP buffer; jobs have printed or have been
aborted.
Action None.