Xerox DocuPrint 96, Message Manual

Page: 123 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-45
OS Level 2: Routine Maintenance
States a condition and explains what action(s) to take.
OS2000 Enter ‘CONTINUE O’ to resume printing
or
Select ‘CONTINUE O’ to resume printing
Printing was interrupted by the entered command or a system
rollover. The system is now ready to continue printing.
The printer control console displays:
PRESS ‘CONTINUE’ TO RESUME PRINTING
Action Enter the CONTINUE O command or press the <CON> key to
continue printing the interrupted job.
OS2002 Check paper supply in Tray 1
Fewer than 25 sheets remain in (feeder) tray 1.
The printer control console displays one of the following:
CHECK PAPER SUPPLY IN TRAY 1
JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 1
PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 1
READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 1
Action 1. Add paper to (feeder) tray 1. (Refer to the chapter on feeder
trays in your DocuPrint 96/DocuPrint 96MX LPS Operator
Guide .)
2. Press the <CON> key to resume printing.
OS2003 Check paper supply in Tray 2
Fewer than 25 sheets remain in (feeder) tray 2.
The printer control console displays one of the following:
JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 2
CHECK PAPER SUPPLY IN TRAY 2
PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 2
READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 2
Action Add paper to feeder tray 2. (Refer to the chapter on feeder trays in
your
DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)