Xerox DocuPrint 96, Message Manual

Page: 175 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-97
OS6706 DJDE error - illegal disk interleaved graphic callout.
The current job contains DJDE specifying a shared disk (SD)
interleaved graphic. The system cannot call up the graphic because
the job is not being sent through shared disk Interface. The job will
abort.
Action 1. Recode DJDE, using a standard interleaved graphic callout
instead of an SD callout. (Interleaved graphic parameter should
be T instead of D.) (Refer to your
DocuPrint 96/DocuPrint 96MX
LPS PDL Reference .)
2. Restart the job.
OS6709 DJDE processing error: SEF file not found.
The system cannot process your DJDE because the short-edge-feed
(SEF) mapping file requested is not present in the system.
Action Verify the SEF mapping file-name and reenter the DJDE.
OS6710 DJDE processing error: stockset file not found
A DJDE stockset called out within the job is not present on the
system disk.
Action 1. Enter the correct stockset. (Refer to your DocuPrint 96/
DocuPrint 96MX LPS PDL Reference
.)
2. For assistance, contact your systems specialist or Xerox
Customer Support.
OS6711 DJDE processing error: JDE not found.
The JDE invoked by the DJDE statement JDE = jde-id does not exist
in the selected JDL.
Action 1. Enter the CONTINUE I command to continue to process the
job. DJDE will be ignored.
or
Enter the ABORT I command to cancel the job.
2. Recode DJDE to reference a different JDE. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS PDL Reference .)
3. Restart the job.