Xerox DocuPrint 96, Message Manual

Page: 198 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-120 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS8704 Output task does not match IG/Printer type.
Sysgen was performed with a configuration that does not match the
current configuration.
Action Resysgen with the proper configuration if authorized to do so (refer
to your
DocuPrint 96/DocuPrint 96MX LPS System Generation
Guide
),
or
Contact your systems specialist.
OS8800 Insufficient dynamic memory - Input.
The number of features specified in JDE and/or DJDE require more
main memory than is available; or, multiple DJDE “JDE =” or “JDL =”
statements were entered incorrectly.
Action Recreate the job, reducing the number and/or extent of features.
or
Recode DJDEs correctly and restart the job.
OS8850 File management initialization failure. Try rebooting.
The basic file management system has failed to perform correctly.
Action 1. Enter the LIST command to print file directories and document
the problem.
2. Press the Boot button and enter the B to reboot the system.
3. Restart the job.
4. If the problem continues, resysgen the disk if authorized to do
so (refer to your DocuPrint 96/DocuPrint 96MX LPS System
Generation Guide ),
or
Contact your systems specialist.
OS8852 Invalid font file header.
The input task is unable to read a font file header due to software or
system disk/CPU problems. The job will abort.
Action 1. Reload the font file. (Refer to your DocuPrint 96/
DocuPrint 96MX LPS Operations Reference
chapter on using
the font editor for additional information.)
2. Restart the job.