Xerox DocuPrint 96, Message Manual

Page: 255 / 358

SUMMARY SHEET ERROR MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 14-11
Operator requested job abort.
The ABORT I command terminated document processing at the end
of the current page.
Action None.
Page too complicated; too many fonts+forms+operators
text+graphics.
The page is too complicated to print.
Action None.
Parse failure; stack underflow.
During interpretation of an Interpress master, an attempt to move an
operand off the Interpress stack failed because the stack was empty.
Action None.
Requested memory length exceeds maximum size limit.
The Interpress decomposer has a maximum operand size of 16,000
bytes and its limit was exceeded.
Action None.
Second system rollover.
A second rollover has occurred. The document cannot be processed.
Action None.
Too many errors in document.
Too many errors were found in the document to continue processing.
Action 1. Correct the previous errors reported on the summary sheet.
2. Resend the document.
Too many “Unexpected RIP errors” encountered.
The integrity of the Raster Image Processor (RIP) board is suspect
due to the number of unexpected errors; therefore, RIP will no longer
be used.
Action 1. Download the RIP software via the PSC RIP command.
2. Resend the document.
3. If the problem continues, contact your systems specialist or
Xerox Customer Service.