Xerox DocuPrint 96, Message Manual

Page: 109 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-31
OS1540 Cannot space past start of job
One of the following commands was entered:
MOVE n BLOCKS
MOVE n FILES
SPACE n PAGES
SPACE n REPORTS
The system has reached the beginning of a job and cannot space
backward any farther.
Action None.
OS1550 Space or move function stopped by end of data
One of the following commands was entered:
MOVE n BLOCKS
MOVE n FILES
SPACE n PAGES
SPACE n REPORTS
The system cannot space or move forward over any more text
because no more data has been input.
Action None.
OS1551 Inappropriate disk file type specified
An incorrect disk file type has been entered.
Action Check the file type and reenter it correctly. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter
on managing LPS resources for additional information.)
OS1552 File does not exist
The file name entered has not been input or stored on system disk.
Action 1. Verify the file name and reenter it correctly.
2. If the message reappears, load the desired file to system disk.
(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
Reference chapter on managing LPS resources for additional
information.)
OS1553 Insufficient file space for status/accounting
The CJF ACCOUNTING command was entered. Not enough disk
space remains to create a 2000 report file.
Action 1. Delete files to create more disk space.
2. Compress disk. (Refer to your DocuPrint 96/DocuPrint 96MX
LPS Operations Reference chapter on managing LPS
resources for additional information.)
3. Reenter the accounting command.