Xerox DocuPrint 96, Message Manual

Page: 130 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-52 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS2220 Output Tray 2 is full
Stacker tray 2 contains its capacity amount of sheets.
The printer control console displays one of the following:
JOB IS PRINTING. OUTPUT TRAY 2 IS FULL.
OUTPUT TRAY 2 IS FULL
PRINTER IS WARMING UP. OUTPUT TRAY 2 IS FULL
READY TO PRINT. OUTPUT TRAY 2 IS FULL.
Action 1. Empty stacker tray 2. (Refer to the chapter on output trays in
your DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)
or
Send output to stacker tray 1 by entering the SELECT 1
command.
2. Press the <CON> key to resume printing.
OS2230 Output tray is full
The stacker tray is full.
Action 1. Remove the completed output.
2. Press the <CON> key to continue printing.
OS2259 No selected bin available for current paper size
Either the bin has a different size paper or the bin holds a container
for a different size paper.
Action Select an appropriate bin
or
Empty the bin
or
Place correct container in bin.