Xerox DocuPrint 96, Message Manual

Page: 127 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-49
OS2055 Establishing communications with IOT.
The OUTPUT task is establishing communication with the printer.
Until communications are established, printer status information is
not available.
Action None.
OS2056 Finished establishing communications with IOT.
The OUTPUT task has established communication with the printer.
Action None.
OS2060 Paper Tray 1 is empty.
The main feed tray is empty.
No paper remains in feed tray 1.
The printer control console displays one of the following:
BOTH TRAYS SET FOR _._X_._" PAPER
BOTH TRAYS SET FOR _X_MM PAPER
PAPER TRAY 1 IS EMPTY. TRAY 1 IS SET FOR _._X_._" PAPER
PAPER TRAY 1 IS EMPTY. TRAY 1 IS SET FOR _X_MM PAPER
PRINTER IS WARMING UP--PAPER TRAY 1 IS EMPTY-- PRESS i
Add paper to the main feeder tray. (Refer to the chapter on feeder
trays in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)
PRINTING--PAPER TRAY 1 IS EMPTY. BOTH TRAYS SET FOR
_._X_._" PAPER
PRINTING--PAPER TRAY 1 IS EMPTY. BOTH TRAYS SET FOR
_X_MM PAPER
READY TO PRINT--PAPER TRAY 1 IS EMPTY--PRESS i
TRAY 1 IS SET FOR _._X_._" PAPER. TRAY 2 IS SET FOR
_._X_._" PAPER
TRAY 1 IS SET FOR _X_MM PAPER. TRAY 2 IS SET FOR _X_MM
PAPER
Action 1. Press i button on the printer control console for additional
console messages if instructed to do so by the control console
display.
2. Add paper to feeder tray 1. (Refer to the chapter on feeder
trays in your DocuPrint 96/DocuPrint 96MX LPS Operator
Guide .)
3. Press the <CON> key to resume printing.