Xerox DocuPrint 96, Message Manual

Page: 92 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-14 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS1072 Bar OFF, n count satisfied, reader is now enabled
The command BAR OFF n was entered disabling the barcode reader
for a specified number of sheets. The count specified as n was
reached and the barcode reader has been enabled again.
Action None.
OS1073 Data1 = nn, Data2 = nn, Data3 = nn, Data4 = nn
This message is for diagnostic purposes only.
Action None.
OS1080 Start accounting report
The REPORT or ACCOUNT command was entered. The system is
compiling and printing, or writing to magnetic tape, a report of system
usage data.
Action None.
OS1085 Billing report starting
The REPORT BILLING command was entered. The system is
beginning a procedure to display the usage information required for
the Customer Billing Report (“meter read” information).
Action None.
OS1086 Activity report starting
Processing of the Activity Report has begun.
Action None.
OS1087 User report starting
Processing of the User Report has begun.
Action None.
OS1090 End accounting report
The system accounting report has been printed or written to
magnetic tape.
Action None.
OS1095 Billing report ending
The system has completed the display of information required for
customer billing.
Action None.