Xerox DocuPrint 4850, Installation Planning Manual

Page: 99 / 226

Printer specifications and requirements
Installation Planning Guide 6-11
Empty carts may be stored anywhere in your site that is
convenient and provides easy access when the carts are
required for a changeout. Carts with a CCU loaded (a CCU being
stored on the cart) should be stored in a controlled environment,
preferably in the same controlled environment as the printer. This
reduces the amount of time required for the printer to set up the
color developer housing (inside the CCU) once it is installed and
therefore reduces the amount of total time required for a change
of dry ink color.
You should plan for the space necessary to store the carts. For
example, the space in the controlled environment for loaded
carts and other space for empty carts.
The dimensions of the cart are as follows:
NOTE: Additional space (6-inch by 64-inch / 15 cm by 163 cm)
is required in front of the printer for CCU changeout cart
operability.
Space planning guidelines
When determining your space requirements and planning for
shared space between your DocuPrint printers, it is important to
consider all of the components you plan to install.
To ensure all of the space requirements are met, it is important to
work with your Xerox representative.
Before installation, you must consider the following:
• Clearance space requirements where you intend to install the
printing system
• Delivery access requirements
• Recommended cable lengths and locations (refer to the
“System connections” chapter of this guide for more
information)
• Floor leveling.
Dimension Specifications
Width:
Depth:
Height:
Weight: 16.1 inches / 409 mm
29.1 inches / 739 mm
36.9 inches / 937 mm
130 pounds / 59 kg (with CCU loaded).