Xerox DocuPrint 4850, Installation Planning Manual

Page: 21 / 226

Installation Planning Guide 1-1
1. System overview
This chapter provides an overview of the features and functions
of the Xerox DocuPrint NPS/IPS.
Functional overview of the NPS/IPS
The NPS/IPS printers support the processing and printing of
PDL and ASCII jobs from network workstations, as well as IPDS
jobs from an IBM host. Supported PDL formats are PostScript
levels 1 and 2, HP PCL 5c, HP PCL 5e, and TIFF.
Your organization may print only IPDS jobs, network PDL jobs, or
jobs from both environments.
DocuPrint 4850, 4890, and 92C NPS/IPS printers support:
• Printing in various shades and tints of a highlight color plus
black
• Printing in highlight color (black plus one color) at a rated
speed of up to 50 ppm at 300 dpi (4850); 92 ppm at 300 dpi
(4890); and 92 ppm at 300 or 600 dpi (92C)
• Printing simplex and duplex
• Processing and printing of network PDL jobs and IPDS jobs
without soft boot to switch modes
• Multiple weights, sizes and types of paper (refer to the
“Supplies” appendix for details)
• Optional high-capacity feeder
• Optional high-capacity stitcher/stacker
• Optional bypass transport for enhanced finishing and output
to third-party finishing devices (4850 and 92C)
• Sixth Sense, a diagnostic tool that provides system
assessment and problem analysis.