Xerox DocuPrint 4850, Installation Planning Manual

Page: 92 / 226

Printer specifications and requirements
6-4 Installation Planning Guide
Three-phase
DELTA
configurations
The current carrying conductors available for 50 Hz, three-
phase, DELTA are:
• Three-phase
• Safety ground.
NOTE: If one of the phases is connected to ground in the
service system, it should be connected to the neutral terminal of
the printer. In this case, the line is not a true neutral, and voltage
between all current carrying conductors is equal and mutually
120 degrees out of phase.
Environmental specifications
When you select a site location for your DocuPrint printer, avoid
environments with extreme variations in temperature and other
hazards, such as excessive dust or humidity. Recommended
environmental ranges for the work area are as follows:
Table 6-7. 50 Hz three-phase DELTA outlet voltage requirements
Nominal Phase to phase
220 VAC
230 VAC
240 VAC 198-242 VAC
207-253 VAC
216-264 VAC
Table 6-8. Environmental specifications for 4850/4890/92C
Condition Range
Temperature: Recommended:
Minimum:
Maximum:
72° F ± 4° F
22° C ± 2° C
60° F / 15.5 °C
80° F / 26.7° C
Humidity: Recommended:
Minimum:
Maximum:
45% ±10%
30%
65%
Altitude: Normal:
Maximum:
Up to 6,000 feet / 1,830 m
above sea level
9,000 feet / 2,743 m above
sea level.
4850 printer–60 Hz heat dissipation Operating:
Standby:
11,200 BTU/hour
7,400 BTU/hour
4850 printer–50 Hz DELTA heat dissipation: Operating:
Standby:
11,200 BTU/hour
7,400 BTU/hour