Xerox DocuPrint 4850, Installation Planning Manual

Page: 186 / 226

Defining the printer to the host: TCP/IP attachment
F-12 Installation Planning Guide
NOTE: To specify a TCP/IP address space name other than
the default (TCPIP), code the following EXEC statement in
the appropriate PSF writer procedure:
STEP01 EXEC PGM=APSPPIEP,
PARM=(,,,,tcpip_name), REGION=4096K
where tcpip_name is the name of the TCP/IP address space.
SETUP No Setup
message
s issued Installation
preferences SETUP=FORMS
if specified If specified, causes JES
to issue FORMS setup
message when a job
prints which has a
FORMS specification
different from job
previously printed. This is
recommended where
there are multiple paper
stocks for use on the
printer.
RELINTV Not applicable to Xerox
cut-sheet printers
RELMODE None IDLE, TIME, or
NONE Not applicable to Xerox
cut-sheet printers
TIMEOUT Installation
preferences REDRIVE or
STOP REDRIVE: When there is
a time-out after period
specified in DISCINTV
parameter, REDRIVE
requests that PSF
attempt to drive the
printer according to
MGMTMODE
specification.
STOP: Forces operator
to restart FSA.
Note: REDRIVE is
recommended for TCP/IP
printers that may be
shared with other hosts.
TRACE NO YES or NO Should be used only for
debugging PSF-related
problems.
Table F-5. PSF/MVS PRINTDEV statement parameters (Continued)
Item
description
Default
Source of
value
Range of
acceptable
values
Comments
Your
value