Xerox DocuPrint 4850 Installation Planning Manual Download Page 171

Page: 171 / 226

Defining the channel-attached printer to the host

E-5

Installation Planning Guide

Infoprint Manager procedures for AIX

There are five versions of PSF/6000 or Infoprint Manager for AIX:

•

Versions 1.1, 1.2, and 2.1

These earlier versions are called PSF/6000.

•

Versions 3.1 and 3.2

These current versions are called Infoprint Manager for AIX.

There are three different methods for creating printers:

•

System Management Interface Tool (SMIT)

All five versions of PSF/6000 and Infoprint Manager for AIX
support this method.

•

Command line interface

All five versions of PSF/6000 and Infoprint Manager for AIX
support this method.

•

Visual System Management (VSM)

This is a graphical user interface (GUI) supported by Infoprint
Manager for AIX versions 3.1 and 3.2 only.

NOTE: Regardless of the method used, from the Model
pulldown menu, make sure to select Infoprint 60 as your printer
model.

For detailed information on setting the attribute default values
using any of these methods, refer to the appropriate section of
the document, IBM Infoprint Manager for AIX, Getting Started.

Summary of Contents for DocuPrint 4850



































































































































































































































Search results

Summary of Contents for DocuPrint 4850

Reviews:

Related manuals for DocuPrint 4850

Brands by name

Popular brands

Xerox DocuPrint 4850, Installation Planning Manual

Search results

Summary of Contents for DocuPrint 4850

Reviews:

Related manuals for DocuPrint 4850

Brands by name

Popular brands