Xerox DocuPrint 4850, Installation Planning Manual

Page: 69 / 226

Preparing for installation
Installation Planning Guide 4-7
-1 • Schedule operator training.
• Define parameters needed to
configure PSF for connectivity to
the NPS/IPS printer.
Systems analyst Customer and
Xerox _________
Install • Ensure supplies are available.
• Ensure system administrators are
available during software
installation.
• Provide preinstallation checklist
and network address of print
server (or host file containing this
information) to Xerox personnel.
Also, designate two client
workstations if applicable, for
Xerox client software installation.
• Provide host channel address and
channel unit address (if printing
via channel).
• Provide host IP address.
• Sysgen your host to print to an
AFP Type 1, Group 3 printer.
• Set up Data Transfer Mode.
• Install DocuPrint system hardware
and software.
• Load Xerox client software on
client workstations.
• Have operators available for
training.
• Check documentation and
software kits for completeness.
• Have test jobs ready to run.
• Provide stocks needed for default
input configuration.
• Provide parameters needed to
configure PSF for connectivity to
the NPS/IPS printer.
Chapter 4 and
Appendix A
Chapter 4
Appendix B
Customer
Customer
Customer
Xerox
Customer
Customer
Customer
Customer
Customer
Customer
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
Post-
install • Become familiar with support
services available.
• Establish supplies ordering
procedure.
• Provide ongoing printer controller
and DocuPrint printer
maintenance.
• Adjust the printer alignment and
magnification.
• Order additional documentation,
as necessary.
Appendix B
Appendix A
Guide to
Performing
Routine
Maintenance
Appendix B
Customer
Customer
Customer and
Xerox
Xerox
Customer
_________
_________
_________
_________
_________
Table 4-1. DocuPrint NPS/IPS installation planning checklist (Continued)
Week Activity Reference Responsibility
Date
completed