Xerox DocuPrint 4850, Installation Planning Manual

Page: 90 / 226

Printer specifications and requirements
6-2 Installation Planning Guide
Agency certification: UL 478 and 1950, IEC 950, CSA 22.2 #220-
1986, FCC (Class A), and VDE 0871 (Class A).
Outlet configurations
This section discusses specifications for the DocuPrint system
outlets and the required wall outlet configurations for the USA /
Canada and internationally.
NOTE: All power outlets must be dedicated to this equipment.
When determining the electrical connections for your system,
make sure that:
• Each power cord has a separate circuit
• The printer power cord configurations match your receptacle
• Your electrical outlets are within the required specifications.
50 Hz systems: Ensure that power connections are per local
codes/regulations.
Printer outlet voltages—60 Hz
The following table shows the voltages for the outlets on your
printing system. All power outlets must have a dedicated circuit
for each system equipment piece.
Table 6-4. 4890/92C printer 50 Hz DELTA
electrical requirements
Voltage Amp. service KVA rating
220, 230, 240 VAC 30 amp Operating: 5.5
Table 6-5. 60 Hz voltage requirements at power outlet
Measurement of wiring Nominal Range
Line 1 to neutral 120 V 105 to 127 V
Line 2 to neutral 120 V 105 to 127 V
Neutral to ground 0 V 0 to 10 V
Line 1 to line 2 208 V 181 to 220 V
Line 1 to ground 120 V 105 to 127 V
Line 2 to ground 120V 105 to 127 V