Xerox DocuPrint 305, User Manual

Page: 28 / 169

28
2 Printing
Loading Custom Size Paper in Bypass Tray
This section explains the procedure to load custom size paper, using long paper as an
example, in the bypass tray.
Note
• For details on loading other custom size paper except long paper, refer to “Loading Paper in the Bypass
Tray (Optional)” (P. 61).
1. Load the long paper with the side to be
printed facing up and with the back edges
curled up as shown in the diagram (1).
Important
• Curl up the back edges of the long paper in as far a
position as possible from the paper entry point. Doing
it too near to the paper entry point may cause the back
edges of the curled paper to be caught in the entry
point and the paper to be torn.
• Load the paper one sheet at a time.
2. Slide the paper guides to the size of the long paper (2).
3. Set the paper size indicator to <Custom>.
4. Pull out the extension output tray.
Note
• Output the paper one sheet at a time to prevent paper
jam.
Side to be printed