Installation and Setup
ColorQube 8700/8900 Color Multifunction Printer
35
User Guide
Modifying General Settings
You can modify printer settings such as the language, date and time, units of measurement, display
brightness, and startup page from the control panel.
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Device Settings
>
General
, then touch the setting you want to change:
Manual Wake-up Setting
allows you to turn the Wake-up Sensor on or off. It also allows you to
set the sensitivity to wake the printer. When the sensitivity is high, you can wake the printer by
pressing any button or touching the screen. When the sensitivity is low, you can wake the printer
only by pressing Power Saver.
Energy Saver
specifies when the printer goes into energy-saving mode.
Date/Time
allows you to set the time zone, date, time, and display format.
Note:
The date and time are set automatically through Network Time Protocol (NTP). To modify
these settings, go to the Properties tab in CentreWare Internet Services and change the Date and
Time Setup to
Manual (NTP Disabled)
.
Language/Keyboard
allows you to set the language and keyboard layout.
Custom Keyboard Button
allows you to assign text to the custom key on the virtual keyboard.
3.
Change settings as needed, then touch
Save
.
4.
To return to the main screen, touch
Home
.
Setting Energy Saver Mode
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Device Settings
>
General
>
Energy Saver
.
3.
Touch an option:
Intelligent Ready
causes the printer to wake and sleep based on previous usage patterns.
Job Activated
causes the printer to wake when it detects activity.
Scheduled
causes the printer to wake and sleep according to a schedule you specify.
If you selected Intelligent Ready or Job Activated, under Fast Resume, touch
On
to reduce the wake
time. This option changes the default sleep and low-power timeout periods, and increases
energy usage.
If you selected Scheduled as the Energy Saver Mode, to select the times at which you want the
printer to wake or sleep, touch
Scheduled Settings
.
a.
Touch a day of the week in the list.
b.
To wake on activity, under Schedule Based On, touch
Activity
.
