Copying
ColorQube 8700/8900 Color Multifunction Printer 103
User Guide
Specifying Chapter Start Pagination
If you select 2-sided copies, you can set each chapter to start on the front or back of the page. If
necessary, the printer leaves one side of the paper blank so that the chapter starts on the specified side of
the paper.
To set the start side of particular pages:
1.
Press the
Services Home
button, then touch
Copy
.
2.
Under Paper Supply, touch the tray containing the paper for the body pages of the job.
Note:
If the paper supply is set to Auto Select, Chapter Starts is unavailable.
3.
Touch the
Output Format
tab, then touch
Special Pages
>
Chapter Starts
.
4.
On the Chapter Starts screen, touch the
Page Number
field, then use the alphanumeric keypad to
enter the page number.
5.
Under Start Chapter, select the appropriate page:
On Right Page
specifies the front side of the paper.
On Left Page
specifies the back side of the paper.
6.
Touch
Add
. That page is added to the list on the right side of the screen.
7.
Repeat the three previous steps to set other pages.
8.
Touch
Close
. The page settings appear in the list on the right side of the screen.
9.
Touch
Save
.
Adding Inserts
You can insert blank pages or pre-printed sheets in specific locations in your copy job. You must specify
the tray containing the inserts.
Note:
The paper used for the inserts must have the same width as the paper used for the rest of the
document. Inserts cannot be added if Booklet Creation is selected.
To add inserts:
1.
Press the
Services Home
button, then touch
Copy
.
2.
Under Paper Supply, touch the tray containing the paper for the body pages of the job.
Note:
If the paper supply is set to Auto Select, inserts cannot be added.
3.
Touch the
Output Format
tab, then touch
Special Pages
>
Inserts
.
4.
On the Inserts screen, touch the
After Page Number
field, then use the alphanumeric keypad to
enter the page number.
5.
Touch the
Insert Quantity
arrows to specify the number of sheets to insert at that location.
6.
To specify the paper tray to use for the insert:
a.
Touch
Paper Supply
.
b.
Touch the desired tray.
c.
Touch
Save
.
