Xerox Color C60 Series User Manual Download Page 210

Page: 210 / 258

Note

Always check inside the finisher for any individual staples or staple remnants.

Make sure that the machine has stopped printing.

Open the Right Cover on the finisher.

Grasp the Staple Cartridge handle located at (R1), and pull out the staple cartridge
from the finisher.

If necessary, raise the staple cartridge unit as shown and remove the jammed staple.

Move the lever on the rear of the staple cartridge unit in the downward direction.

Xerox

Color C60/C70 Printer

13-38

User Guide

Standard/Booklet Maker Finisher

Summary of Contents for Color C60 Series



































































































































































































































































Search results

Summary of Contents for Color C60 Series

Reviews:

Related manuals for Color C60 Series

Brands by name

Popular brands

Xerox Color C60 Series, User Manual

Search results

Summary of Contents for Color C60 Series

Reviews:

Related manuals for Color C60 Series

Brands by name

Popular brands