Xerox Color C60 Series User Manual Download Page 110

Page: 110 / 258

Loading Original Documents

With the exception of Faxing from Your Computer, all fax transmissions begin with
loading the original document at the multi-function printer.

• Use the document glass for single page jobs or for originals that will not feed through

the document feeder.

• Use the document feeder for multiple or single page jobs.

Document Glass

Lift the document feeder cover and place the original facedown, toward the back-left
corner of the document glass as shown.

Caution

When scanning a bound document, do not attempt to force the document feeder cover
closed. Doing so may damage the document feeder cover.

Duplex Automatic Document Feeder

Insert originals face up. Adjust the paper guides so they fit against the originals.

Xerox

Color C60/C70 Printer

8-2

User Guide

Faxing

Summary of Contents for Color C60 Series



































































































































































































































































Search results

Summary of Contents for Color C60 Series

Reviews:

Related manuals for Color C60 Series

Brands by name

Popular brands

Xerox Color C60 Series, User Manual

Search results

Summary of Contents for Color C60 Series

Reviews:

Related manuals for Color C60 Series

Brands by name

Popular brands