Xerox B215, User Manual

Page: 294 / 306

Fax Regulations
Xerox
®
B215 Multifunction Printer
User Guide
294
The REN assigned to each terminal device provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface could consist of any
combination of devices. The only limitation to the number of devices is the requirement that the sum
of the RENs of the devices does not exceed 5. For the Canadian REN value, see the label on the
equipment.
Canada CS-03 Issue 9
This product has been tested to and is compliant with CS–03 issue 9.
European Union
Radio Equipment & Telecommunications Terminal Equipment Directive
This device has been designed to work with the national public switched telephone networks and
compatible PBX devices of the following countries:
If you have problems with your product, contact your local Xerox representative. This product can be
configured to be compatible with other country networks. Before reconnecting the device to a network
in another country, contact your Xerox representative for assistance.
Note:
• Although this product can use either loop disconnect (pulse) or DTMF tone signaling,
Xerox recommends that you use DTMF signaling. DTMF signaling provides reliable and
faster call setup.
• Modification of this product, or connection to external control software or control
apparatus not authorized by Xerox, invalidates its certification.
Pan-European Analog PSTN and Compatible PBX Certifications
Austria Greece Netherlands
Belgium Hungary Norway
Bulgaria Iceland Poland
Cyprus Ireland Portugal
Czech Republic Italy Romania
Denmark Latvia Slovakia
Estonia Liechtenstein Slovenia
Finland
Lithuania Spain
France Luxembourg Sweden
Germany
Malta United Kingdom