Xerox B215, User Manual

Page: 133 / 306

Scan To
Xerox
®
B215 Multifunction Printer
User Guide
133
Macintosh Scanning
This section describes the procedure for scanning using applications on a Macintosh computer running
Mac OS X 10.9 or later.
For Macintosh scanning, the Printer Driver with the Printers & Scanners program, or an application such
as Image Capture must be installed. Printer drivers for Macintosh can be downloaded from
www.xerox.com/office/B215support .
Before you begin:
• Ensure the Scan function has been set up for your device. For details, refer to Installation and
Setup .
• Ensure the applications required are loaded on your Macintosh computer and ready to use.
Use TWAIN-compliant software to apply more scan options. You can also scan using TWAIN-compliant
software, such as Adobe Photoshop. For information about using the TWAIN driver, refer to
Scan Using
TWAIN and WIA .
Scanning Using the Printers and Scanners Program
Make sure that the printer is powered on and connected to your computer using a USB cable, or
installed on the network. Download and install the scan driver, refer to
Installing Printer Software .
1. At the printer, load originals face up into the automatic document feeder, or place a single original
face down on the document glass.
2. At your Macintosh computer, open
System Preferences
, then select
Printers & Scanners
.
3. From the list of printers, select the printer required.
4. Select
Scan
, then click
Open Scanner
.
5. Select the features for the scan job.
For information about the scan options, refer to
Macintosh Scan Options .
6. Click
Scan
.
The original document is scanned and saved to the specified folder.