![background image](http://html2.mh-extra.com/html/xantech/xtralink-ip/xtralink-ip_user-manual_3175333026.webp)
Server Properties Configuration
Chapter 5 39
The following dialogue box will appear:
Figure 34. The Restarting Dialogue Box
After eight seconds a dialogue box will ask whether you want to search
for all reachable servers again.
Figure 35. The Server Search Dialogue Box
While the XTRALINK IP is searching for all reachable servers the
following dialogue box appears:
Figure 36. The Search XTRALINK IP IPRS23202
MANAGER Dialogue Box
After that port has been updated you may want to re-enter
Server
Properties
to verify the changes have taken effect, or to view/change
the configuration of other ports. Each port must be configured
separately.
Saving Configuration Data in Console Mode or Telnet
Saving (updating) server properties is done from the
Configuration
screen. Access the
Configuration
screen by tabbing through the list of
screens on the left side of the window and highlighting
Configuration
.
Server Properties Configuration
40
Chapter 5
There are four options shown on the right side of the
Configuration
screen:
Save
,
Default
,
Running
and
Reset
. Use
Tab
,
Backspace
, or
arrow
keys to move the cursor to the option position, and then press
Enter
.
Figure 37. Console Mode and Telnet Configuration Screens
•
Save
stores the configuration data to the
XTRALINK IP
flash
memory and resets it.
•
Default
restores the configuration data to factory default settings.
•
Running
restores the configuration data to the last values stored in
the flash memory.
•
Reset
re-boots the
XTRALINK IP,
making it available for a client
connection.
Web Server Interface
•
The
Web Server
interface provides the same updating options as
Console Mode
and
Telnet
. These are located at the bottom of all
three
Web Server
pages. If a field is changed, you must click
Save
before leaving that page or the changes will be ignored.