wtw OxiTop Control OC 110, Operating Manual

Page: 14 / 102

Commissioning OxiTop
®
Control OC 110
14
ba31116e05 07/2014
3.2.3 Energy saving feature (automatic switch-off)
The instrument switches off automatically following the last key actuation after
expiry of the specified switch-off interval.
To specify the switch-off interval: see section 9.4.8 S
WITCH
-
OFF INTERVAL
, page
65.
3.3 Initial commissioning
Perform the following activities:

Insert the supply battery holder in the controller (see section 3.3.1 I
NSERTING
THE SUPPLY BATTERY HOLDER
-
CONTROLLER
, page 14)

Switch on the instrument

Set the date and time (see section 9.4 S
ETTINGS
, page 59)
3.3.1 Inserting the supply battery holder - controller

Loosen the 4 screws underneath the housing using a Phillips screwdriver.

Place the controller on the lower case.

Remove the upper case and put it down to the right next to the lower case
with the display downwards.

Connect the supply battery holder with the power supply contacts of the
upper case.

Insert the supply battery holder in the lower case with the open side down.
1 Screws
LISTED 8F93
Laboratory Equipment
E163694
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following conditions: (1) This devise may not
cause harmful interference, and (2) this devise must accept
any interference received, including interference that may
cause undesired operation.
Ser.-Nr.:05150013
Oxi Top OC 1x0
WTW 82362 Weilheim
Made in Germany
1x CR 2430 Lithium
3x Alkaline, AA size, 1,5V
1
1
1
1