wtw OxiTop Control OC 110, Operating Manual

Page: 53 / 102

OxiTop
®
Control OC 110 Operating mode: Pressure p
ba31116e05 07/2014
53
7.7 Evaluation
SAMPLE STATUS TYPE (sam-
ple management):
Use <

><

> to select a sam-
ple.
Entry into the evaluation:
Display of the selected sample
as a curve with measurement
value data.
Stored momentary values
appear additionally as vertical
lines on the curve.
Change to cursor query:
1 The scaling of the Y-axis
is automatically adapted
to the measured value
2 Measuring time at the
cursor position
3 Measured value at the
cursor position
Use <

><

> to run through the
curve values.
The allocated run duration and
the corresponding measured
value are each displayed.
Use <PRINT> to print out the
current display.
Use <RUN/ENTER> to switch between the cursor interroga-
tion and display of the curve with measured value data.
Sample display for a measurement with intermediate aera-
tions without any saved momentary values:
Interventions in the course of the
measurement, for example inter-
mediate aerations, are visible in
the curve.
RUN/ENTER
1
2
3