wtw OxiTop Control OC 110, Operating Manual

Page: 25 / 102

OxiTop
®
Control OC 110 Operating mode: BOD Standard / BOD Routine
ba31116e05 07/2014
25
Start the next measuring head

(2).
Contact selection:
The number of the measuring
head is automatically incre-
mented.
The controller continues to work with the contact selection, i.e.
you can now start a sequence of measuring heads (parallel
sample process) without having to press any further keys by
holding the controller to the next measuring head to be
started.
When all the measuring heads provided for this sample have
been started:
Confirm
Stop

start with <RUN/ENTER> .
The controller returns to the entry menu.
If no measuring head is started (e.g. because the controller
was not held to - or not close enough to - a measuring head):
The start was stopped.
Use <RUN/ENTER> - Continue

start to confirm “Continue
start” and hold the controller to a
measuring head (see above).
Return to entry level menu with
- Stop

start
If an attempt is made to start a measuring head that was
already started:
Displays

already used!
Use <RUN/ENTER> to confirm -
New

and hold the controller
to a free measuring head (see
above).
Return to entry level menu with
- Stop

start
In the delivery state, the controller automatically makes space when
Start is selected if the measured value memory is full.
To do this, it deletes the oldest finished sample (if a finished sample
is available). You can change this setting to “manual erase” (see
section 9.4.6 D
ATA STORAGE
, page 63).