wtw OxiTop Control OC 110, Operating Manual

Page: 81 / 102

OxiTop
®
Control OC 110 Maintenance, cleaning, disposal
ba31116e05 07/2014
81
11 Maintenance, cleaning, disposal
11.1 Maintenance
11.1.1 General maintenance activities
The only maintenance activity required is replacing the batteries.
11.1.2 Replacing the supply batteries (controller)

Switch off the controller OxiTop
®
-OC 110.

Loosen the 4 screws underneath the housing using a Phillips screw-
driver.

Place the controller on the lower case.

Remove the upper case and put it down to the right next to the lower
case with the display downwards.
1 Screws
1 Supply batteries in the battery holder (lower case)
2 Data backup battery (upper case)
LISTED 8F93
Laboratory Equipment
E163694
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following conditions: (1) This devise may not
cause harmful interference, and (2) this devise must accept
any interference received, including interference that may
cause undesired operation.
Ser.-Nr.:05150013
Oxi Top OC 1x0
WTW 82362 Weilheim
Made in Germany
1x CR 2430 Lithium
3x Alkaline, AA size, 1,5V
1
1
1
1
1
2