Safety & General Information
Engine/Motor Specifications
Safety & General Information
HDdoc012020
1-19
1
1.9
Engine/Motor Specifications
See Table 1-6.
The power options available for the LT40 Series DH sawmills are listed below.
See Table 1-7.
The power options available of the Power Feed and Up/Down Systems for the LT40
Series DH sawmills are listed below.
1.10 Noise Level
See Table 1-8.
The noise levels of the Wood-Mizer LT40
12
sawmills are listed below.
1.11 Dust Extractor Specifications
Engine/Motor Type
1
1
Use uleaded, minimum 87 octane fuel for G25. Use diesel fuel for D33.
Manufacturer
Model No.
Power
Other Specifications
28HP Gasoline
Kohler
CH745
28KM
3600 RPM, 725 cm
3
33HP Diesel
Kubota
V1505-EBB-EC-LT-
STD.1
33KM
4 cylinders 1498 cm
3
15HP Electric
Tamel SA,
Poland
Sg 1328-2PG
11kW
22,3 A, 2950 RPM
TABLE 1-6
Engine/Motor Type
Manufacturer
Voltage
Power
WM Part #
Power Feed Motor
Leeson, USA
12V
1800 RPM-600W
024169
Up/Down Motor
Leeson, USA
12V
1800 RPM-600W
015174
Blade Guide Arm Motor
Motor Products
Owosso, USA
12V
60 RPM-17W
P09698-1
Hydraulic Pump Motor
Iskra
12V
2400 RPM-1320W
038683
TABLE 1-7
Sawmill
Noise Level L
EX8
LT40 sawmill equipped with Diesel engine
87.7 dB (A)
TABLE 1-8
1. The noise level measurement was taken in accordance with PN-EN ISO 3746 Standard. The
noise exposure level given above concerns an 8-hour work day. Value for associated uncertainty
K=4dB.
2.The measured values refer to emission levels, not necessarily to noise levels in the workplace.
Although there is a relation between emission levels and exposure levels, it is not possible to
determine with certainty if preventives are needed or are not needed. The factors affecting a current
level of noise exposure during work are inter alia room characteristics and characteristics of other
noise sources, e.g. number of machines and machining operations nearby. Also, the permissible
exposure level value may vary depending on country. This information enables the machine’s user to
better identify hazards and a risk.
