SAWMILL ASSEMBLY
Bed Frame Assembly
SAWMILL ASSEMBLY
15doc063022
2-12
2
See Figure 2-8.
Next place the bar on the top of the upper track rail. The bar must touch the rail along its
entire lenght. If there is a gap in the middle of the bar or at its end, you need to put
wedges under segment legs (frame with non-adjustabe legs) or adjust the legs to raise
the appropriate end of the segment (frame with adjustable legs).
See Figure 2-10.
FIG. 2-9
FIG. 2-11
Adjustment Bolt
Bar must touch the track rail
along its entire lenght
Track Rail
Mounting Bolt
Bar must touch the track rail
along its entire lenght
Wedges