MAINTENANCE
Safety Devices Inspection (CE Version Only)
MAINTENANCE
25doc063022
4-21
4
3. Blade cover safety switch and its circuits inspection
Start the engine;
Turn the tensioner handle to engage the blade;
Open the blade housing cover;
The engine should be stopped;
Try to start the engine. The engine should remain stopped;
Close the blade housing cover;
The engine should remain stopped.
4. Blade brake and its circuit inspection
Start the engine;
Turn the tensioner handle right to engage the blade.
Stop the engine by switching the key to “0” position. Measure the braking time.
The braking time should always be shorter than 10 seconds. If the braking time is longer, it is
necessary to adjust or replace the brake pads.
See Section 3.9