Safety & General Information
Use Proper Maintenance Procedures
1
1-9
25doc063022
Safety & General Information
WARNING!
Consider all electrical circuits energized and
dangerous.
WARNING!
Disconnect and lock out power supply before
servicing the sawmill! Failure to do so may result in serious
injury.
WARNING!
Never assume or take the word of another
person that the power is off; check it out and lock it out.
WARNING!
Do not wear rings, watches, or other jewelry
while working around an open electrical circuit.
WARNING!
Remove the blade before performing any
service to the motor or sawmill. Failure to do so may result
in serious injury.
DANGER!
Never clean the blade or blade wheels using the
hand-held brush or scraper whilst the sawmill blade is in
motion.
CAUTION!
Before installation of the blade, inspect it for
damage and cracks. Use only properly sharpened blades.
Always handle the blade with extreme caution. Use suitable
carrier equipment for transporting the blades.
CAUTION!
Always wear gloves when handling the blade.
Never grab the blade with bare hands!
CAUTION!
If the blade breaks during sawmill operation,
push the EMERGENCY STOP button to stop the blade
motor and wait 10 seconds before you open the blade
housing cover.
CAUTION!
The sawmill’s work-stand should be equipped
with a 4 kg or bigger dry powder extinguisher.