SETUP & OPERATION
Setting up sawmills equipped with non-adjustable legs
SETUP & OPERATION
doc063022
3-2
3
IMPORTANT!
When starting the machine for the first time, check that
main motor rotation direction is as indicated by the arrow located on
the motor body (fan guard). If the rotation direction is incorrect, invert
the phases in the phase inverter in the power socket (electric box).
Setting the phases in the phase inverter correctly will ensure correct
rotation directions of all sawmill motors.
WARNING!
In case of a blade or drive belt brake, wait until all rotating
parts are completely stop. Failure to do so may result in serious injury.
3.1.1
Setting up sawmills equipped with non-adjustable legs
Set up the mill on firm and level footing. Fasten the mill to the floor to prevent any creep after
prolonged use. A cement pad with 5/8” (16 mm) diameter anchor bolts is recommended. The cement
pad should be rated to support 6350 lbs./sq.ft. (31 T/m²) at each sawmill foot position.
WARNING!
Do not operate a sawmill without the feet securely
fastened to the floor.
!
